DG-Lab Conductive Pro Loops Coyote 3 E-Stim
DG-Lab Conductive Pro Loops Coyote 3 E-Stim
Hi guys and welcome back to another Coyote 3 blog in today’s episode I’m going to be showing you how to use the conductive Pro Loops from DG-Lab this is only going to be a short blog so let’s get into it.
Hi guys I’m UKDAZZZ as always and as I said at the start of the blog I will be showing you how to use the conductive Pro Loops from DG-Lab like all blogs I will be showing you what you get when you buy the conductive loops and I’m going to be showing you how to use them so sit back Relax hit that like And subscribe button and let’s get into the blog.
Unboxing DG-Lab Conductive Loops
Okay so let’s show you what you get when you buy the conductive Pro Loops from DG-Lab the Pro Loops do have a conductive elastic that runs through the centre of the rubber. Don’t worry I’ll show you everything you need to know about it as soon as I get it all out the packet.
What You Get When Buying DG-Lab Loops
So when you buy your Pro Loops you do get replacement conductive rubber tubing.
Which you can see I’m trying to take out of the packing now as this does degrade over time you do get an additional 60 cm worth of tubing and as the plastic wire that runs through the inside is also degradable DG-Lab gives you an additional 60 cm of that and if you do lose any of the plastic fittings.
You also get Replacements of those as well and if we take a closer look at our conductive Loops we can see what our plastic fittings are used for and if you’re wondering where our elastic wire is it’s inside the loop.
So you might be wondering what the elastic wire does it simply creates a more even path for the electric current to run round which means there’s less current resistance what I’m going to show you next is is how to connect your conductive rubber Loops to your Coyote 3 when you purchase your Coyote 3 you get this connecting cable.
How To Connect Conductive Loops To Coyote 3
What you need to do is pull slightly on one of the plastic fittings this exposes the elastic wire and all you need to do is push in one of the pins you can buy conductive gel that makes it easier to push in.
Once your pin is fully inserted take your second Loop and repeat the same process using the second pin
How To use Your Conductive Loops
what you’ll be left with is both Loops connected to the same cable then you need to attach the loops to penis for the purpose of this blog.
I am going to use my fingers once both Loops have been put on make sure there’s a gap in between both making sure that they don’t touch if the loops do touch whilst the Coyote 3 is switched on it can short it out now plug the cable into your Coyote 3.
You’re now ready to turn it on and have some fun if you have been inspired to buy the pro conductive Loops or the Coyote 3 there is a link in the description below and if you have found this blog use so far please do hit that like And subscribe button.
So there you have it that’s what you get when you buy the conductive Pro Loops from DG-Lab.
What You Need To Know About The Conductive Loops.
Now when using the conductive Loops I highly recommend that you buy some Loop and this probably does sound a little strange as there is no movement from the toy.
if you don’t use Loop when you’re using the conductive Loops it can create hotspots and it also creates this kind of prickling sensation and what the lube does is it creates like a easier path for the electric to run round and this just stops any of the sort of hotpots from building up.
I have used the loops with and without the lube without it and it can be quite uncomfortable but with it it’s one of the most enjoyable attachments so yeah highly recommended that you get some lube.
Coyote 3 Reddit Groups
If you are looking to make new friends with your Coyote 3 there is a link in the description below that will take you to my subreddits in these groups you can share waveform patterns and you can connect and control each other’s toy.
Where To Buy Coyote 3 Conductive Loops?
If you have been inspired to buy yourself a set of conductive Pro Loops from DG-Lab or the Coyote 3 there is a link in the description below this is an affiliate link it doesn’t cost you any more to use but it does give me a very small percentage of the DG-Lab profits if you choose to buy something if you have found this blog useful please do hit that like And subscribe button and notification Bell.
If you’ve got any questions feel free to come and drop them in the comments box below on my blog or come and find me on social media all those links are also listed in the description below.
That’s it for this blog guys thanks for watching.
Until next time.
Peace out
My Social Media:
Please like, share, and subscribe for future posts.
As you may know, I have a YouTube channel and web page with accompanying videos to all topics listed. I have also recently added a Podcast Page with all the audio from my videos.
